SPINWORX® r3.5 - diam. 16 - 35 mm, 7° positive rake angle The SPINWORX system in its smallest version • effective use of cutting edge and machining of smaller workpieces • wide range of use for almost all areas of application • effective use of the cutting edge • with specially adapted coolant supply • low power consumption, high chip removal rate CAUTION - PLEASE NOTE! For optimum results with the SPINWORX®-tooling system we recommend using internal coolant supply air, emulsion or MQL for chip removal from the tool! Wet machining up to max speed Vc of 140 m/min! Uninterrupted machine running time of 579 minutes - and the inserts wear limit was not yet reached. This process reliability without any cutting edge break-out speaks for itself and for SPINWORX®. Process-reliable machining of titanium alloy for the aerospace industry. Compared to a competitors product and thanks to SPINWORX® it was possible to manufacture a more than three times higher quantity with only one set of inserts. And the inserts wear limit was not yet reached. SPINWORX® r5 - diam. 20 - 52 mm, 7° positive rake angle The all-rounders in the SPINWORX series. • wide range of use for almost all areas of application • effective use of the cutting edge • with specially adapted primary and secondary coolant supply • low power consumption, high chip removal rate CAUTION! PLEASE NOTE! For optimum results with the SPINWORX®-tooling system we recommend using internal coolant supply air, emulsion or MQL for chip removal in the tool! Wet machining up to max speed Vc of 140 m/min!