Nuts
{{#each product.specData:i}}{{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}{{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
Nominal diameter: 8 mm
Height: 8 mm
Secure, conductive connection Notch at bolt end as marker for identifying correct position Profile finishing: not required Product attributes - Profile slot - 10 ESD - yes Packaging unit - 100 Weight [kg] - 0.00895
Nominal diameter: 4 mm
Height: 4 mm
Width: 11.5 mm
T-nut6 mm slot steel; galvanized Standard element for secure, conductive connections Stop for correct positioning in the profile slot Stainless steel T-nut, e.g. for outdoor or cleanroom applications Profile ...
Nominal diameter: 5 mm - 10 mm
Height: 24 mm - 35 mm
Width: 50 mm - 75 mm
Only Tapped Hole type is available. -Thread Size- M5×0.8 M6×1 M8×1.25 M10×1.5 -Materials- Body: Stainless steel(SCS13A), Electropolished Datasheet https://www.imao.co.jp/files/on-cat/pdf/en/wk-e.pdf
Imao Corporation
Nominal diameter: 12 mm - 36 mm
Height: 7.5 mm - 23 mm
Width: 1.5 mm - 8 mm
-Feature- Perfect for use in fixing a panel board. Steel type and Stainless type are available. Tapped Hole type and Stud Type are available. -Thread Size- M3×0.5 M4×0.7 M5×0.8 M6×1 M8×1.25 M10×1.5 -Stud Length- 10 mm 15 ...
Imao Corporation
Nominal diameter: 12 mm - 30 mm
Height: 7.5 mm - 18 mm
Width: 1.5 mm - 6 mm
-Feature- -Perfect for use in fixing a panel board. -Stud(Partly-Threaded) type -How To Use- -The type has a partly-threaded stud that helps to prevent the knob from dropping off a panel board when it is removed. -Thread Size- M3×0.5 M4×0.7 M5×0.8 M6×1 M8×1.25 -Stud ...
Imao Corporation
... and unintentionalnutloosening. Tool Longevity Other bolting systems put the reaction arm and square drive on opposite sides of the tool causing high stress in the body of the tool, which can lead to failure over time. ...
... Gall FreeNutis the new anti-galling technology in a standard hexnut. The HYTORC Gall Freenutin combination with the HYTORC Washer guarantees the elimination of galled or damaged ...
Nominal diameter: 8 mm - 24 mm
Height: 36 mm - 90 mm
Width: 36 mm - 90 mm
Material:1.1141 steel, 1.4301 stainless steel or 1.4401 stainless steel.Version:drop forged.Note:For high demand hoisting and carrying tasks in safety-relevant areas (machine construction, load handling equipment, lifting tackle). The ...
Nominal diameter: 6 mm - 36 mm
Height: 12 mm - 52 mm
Width: 15 mm - 65 mm
Material:Version:Steel black. Aluminium and stainless steel bright.Note:Nutsfor T-slots in aluminium have threaded steel inserts.
CaptiveNutsNutclips into Rebate Profile 8 Al 19″ Quickly fitted and removed CaptiveNutM5, bright zinc-plated CaptiveNutM6, bright zinc-plated
Nominal diameter: 16, 19, 132.5 mm
Height: 32, 24, 28 mm
Width: 8, 9, 7 mm
... loss of the wingnut. The EWN-LP Wingnutsare part of the Ergostyle line, whose products are made in an ergonomic design that easily adapts to worker's hand. Special executions on request • - Chain ...
These wingnutsallow high tightening torque values. The slightly concave marks on the wings help to position the fingers in order to apply the maximum force when tightening. AISI 304 stainless steel, sandblasted matte ...
MATERIAL Cast AISI CF-8 stainless steel, sandblasted matte finish. FEATURES AND APPLICATIONS These wing knobs allow high tightening torque values and a comfortable grip, thanks to the elongated hub.
Nominal diameter: 5 mm - 10 mm
Height: 24 mm - 36 mm
Width: 48 mm - 70 mm
Design and handling of the wingnutsGN 634 comply with the requirements and claims of the Ergostyle® product family.
Otto Ganter GmbH & Co. KG
Nominal diameter: 6 mm - 10 mm
Height: 22.5 mm - 26.5 mm
Width: 46 mm - 58 mm
... are wingnutsand wing screws. They are available in both stainless steel and plastic models. Using these devices, customers can achieve a torque that is comparatively higher than they could with competing models. These ...
Otto Ganter GmbH & Co. KG
Nominal diameter: 5 mm - 8 mm
Height: 11 mm - 18 mm
Width: 15 mm - 30 mm
的surface quality of the knurlednutsGN 530.5 is of a sufficiently high standard to meet the highest requirements. The flash mark is not visible. Duroplast material is highly resistant to chemicals.
Otto Ganter GmbH & Co. KG
Nominal diameter: 5 mm - 8 mm
Height: 18 mm - 20 mm
Width: 34 mm - 48 mm
The plastic wingnutis made of black thermoplastic. Users looking for minimum quantities custom colors can order for it. There are options in threaded metalinsertsbecause they are available upon request ...
GAMM
Nominal diameter: 6 mm - 10 mm
Height: 28 mm - 36 mm
Width: 55 mm - 70 mm
The GF/FP series is a plastic wingnutthat is made of black thermoplastic material. It is available in stainless steel, zinc plated steel and brass constructions. Threaded metalinsertsand colors are ...
GAMM
Nominal diameter: 8, 10 mm
Height: 20 mm - 40 mm
Width: 55 mm - 77 mm
The GAMM industrial Handle GF/P is a wingnutmade of materials like black thermoplastic, or sometimes made of threaded metals like brass, zinc plated, steel or stainless steel that can be availed upon request.
GAMM
Nominal diameter: 4 mm - 24 mm
Height: 5 mm - 28 mm
HELICOIL®nutswith integrated HELICOIL® Screwlock ensure secure screw joints. An efficient linking of two fasteners. Thenutscomprise anutbody and an integrated HELICOIL® Screwlock ...
Nominal diameter: 6 mm - 20 mm
Height: 7 mm - 30 mm
... SEAL LOCK® sealingnutsprovide a reliable seal against gas or liquids, even under high pressure. Easy to install, doubly reliable. SEAL LOCK® seals simultaneously inside the thread and below the head. The one-piece ...
Height: 3.2, 8.6 mm
These Natural Nylon #8-32 Standard HexNutshave an overall height of 3.2 mm and are 8.6 mm across flats
Essentra Components
Nominal diameter: 4 mm
Height: 6 mm
ThumbNut- Plastic Round, for a thread size M4 x .7 Item code: 0660020000VR 26700 In stock Round ThumbNuts- suitable for a thread size M4 x .7, thisnuthas an overall height ...
Essentra Components
# Made from nylon-6 (PA-6) and 30% glass fibre or polystyrene (PS) # Colour: grey # Exchangeable easily due to standard design # Metric thread pitch 1.5 mm # Applicable in electro cabinets and fittings
Essentra Components
Nominal diameter: 5 mm - 8 mm
... large borehole tolerance and the ability to cover various clamping areas with just one fastener, the PolyGrip® blind rivetnutis the number one joining element for a number of industrial applications as well as within trade.
GESIPA® Blindniettechnik GmbH
Joining two or more components, GESIPA® CAP rivetnutsprovide a fully air and watertight connection.
GESIPA® Blindniettechnik GmbH
GESIPA® blind rivetnutsare create highload-bearing and durable threads for non-permanent connections. Splined rivetnutscome with anti-twist protection, guaranteeing an even better grip.
GESIPA® Blindniettechnik GmbH
Nominal diameter: 16 mm - 80 mm
The wide range of flanged ballnutsallows a variaty of different connectivity options for diverse applications. The flanged ballnutsare either available from stock with a flattened flange for limited ...
NEFF-Gewindetriebe
Nominal diameter: 16 mm - 63 mm
The wide range of flanged ballnutsallows a variaty of different connectivity options for diverse applications. The flanged ballnutsare either available from stock with a flattened flange for limited ...
NEFF-Gewindetriebe
Nominal diameter: 16 mm - 63 mm
KGM-D The wide range of flanged ballnutsallows a variaty of different connectivity options for diverse applications. The flanged ballnutsare either available from stock with a flattened flange ...
NEFF-Gewindetriebe
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.
MayTec
Nutto be used in conjunction with a hammer head screw Measures: M6 / M8 Material: Zinc plated steel / stainless steel
Nominal diameter: 6.35 mm - 9.53 mm
Height: 0.313 in - 9.525 in
Width: 0.44 in - 9.53 in
Jergens Inc.
Height: 0.375 mm - 1.5 mm
Width: 0.75 mm - 2.75 mm
Where heavy clamping pressures and vibrations could cause trouble, the wide face surface of the flangenutholds through with greater friction. Material: Low Carbon Steel Finish: Black Oxide Heat Treat: Case Hardened Thread: ...
Jergens Inc.
Nominal diameter: 0.13 in - 0.38 in
Height: 0.375 in - 0.5 in
Width: 1 in - 2 in
Knurled LockNutsMost convenient for quick thread locking on your jig and fixture work. Straight knurled radius provides sure, non-slip finger grip in oily conditions. Faces are square with threads which assures a large ...
Jergens Inc.
Nominal diameter: 4 mm - 8 mm
13x13 squarenutMaterial see table. Characteristics: it can be inserted sideways into an open groove. Tightening torque < 20 Nm.
Nominal diameter: 4 mm - 8 mm
Material Class 8 steel. Characteristics: it can be inserted sideways into an open groove; positioning spring for fitting in vertical grooves. Tightening torque < 20 Nm.
Nominal diameter: 10 mm
Height: 28.5 mm - 33.5 mm
Width: 12.9 mm
Blind RivetNutsBlind RivetNutsFlat Head, Round Shank Knurled, with Serration under Head, Closed Type, Stainless Steel A2 Clamping range max. - 6,0 Packaging - Goebel Clamping range min. - 3,0 Head ...
Goebel集团
Nominal diameter: 10 mm
Height: 17 mm - 22 mm
Width: 12.9 mm
Blind RivetNutsBlind RivetNutsFlat Head, Round Shank Knurled, with Serration under Head, Open Type, Stainless Steel A2 Clamping range max. - 6,0 Packaging - Goebel Clamping range min. - 3,0 Head ...
Goebel集团
Nominal diameter: 4 mm
Height: 11.5 mm
Width: 6 mm
Blind RivetNutsBlind RivetNutsFlat Head, Semi-Hexagonal Shank, Open Type, Stainless Steel A2 Clamping range max. - 2,5 Packaging - Goebel Clamping range min. - 0,5 Head shape - Flat head
Goebel集团
Nominal diameter: 6 mm - 30 mm
Height: 45 mm - 109 mm
Width: 45 mm - 108 mm
STAMPERIA CARCANO CARCANO S.P.A.
Nominal diameter: 8 mm - 48 mm
Height: 43.5 mm - 211 mm
Width: 34 mm - 162 mm
STAMPERIA CARCANO CARCANO S.P.A.
Nominal diameter: 3 mm - 20 mm
Height: 8.6 mm - 33.8 mm
Width: 17.6 mm - 68.5 mm
STAMPERIA CARCANO CARCANO S.P.A.
Height: 2, 10, 4 mm
Width: 40 mm - 600 mm
... different types ofnutsactuated by grease: -Nutswith transverse or axial nipple and release screw.Nutsare actuated by an external unit (normally a grease pump). -Nuts...
Nominal diameter: 6.3 mm - 20.55 mm
Height: 1.5 mm - 8.5 mm
Width: 4.2 mm - 16.95 mm
Quick, convenient assembly using standard tools Installation of self-clinchingnutsis simple, quick, and convenient. Justinsertthem in punched or drilled holes, then apply a squeezing force to embed ...
Shenzhen In-saiL Precision Parts Co.,Ltd
Nominal diameter: 6 mm - 10 mm
Height: 189 mm - 300 mm
Width: 500 mm - 650 mm
steel pressurenut两种类型的承载线程,自锁d non-self-locking, are provided on the thin plate. Provides standard profile load bearing internal threads in sheets as thin as .025″ / 0.64 mm. Meets ...
Shenzhen In-saiL Precision Parts Co.,Ltd
Nominal diameter: 2 mm - 5 mm
Height: 1.5 mm - 3 mm
Width: 5.56 mm - 9.53 mm
... polycarbonate components. Types LKF2 and LKFS2 broachingnutsare internally threaded for mounting on PC boards. Special materials and specifications can be customized on demand. Type LKF2 and LKFS2 - Broachingnuts, ...
Shenzhen In-saiL Precision Parts Co.,Ltd
Nominal diameter: 5, 6, 8 mm
Height: 9.5, 12, 13 mm
DEFORM-NUT® E TFM/C - THREADED TUBULAR RIVETNUTWITH FLUSH HEAD AND HEXAGONAL SHORT SHANK Family Deformation ThreadedInsertType of product Deformation ThreadedInsertReceiving ...
Specialinsert s.r.l.
Nominal diameter: 12 mm
Height: 36.5, 39.5 mm
DEFORM-NUT® E TFM/CH M12 - THREADED TUBULAR RIVETNUTWITH FLUSH HEAD AND HEXAGONAL SHANK Family Deformation ThreadedInsertsType of product Deformation ThreadedInsertReceiving ...
Specialinsert s.r.l.
CLIFA® 500-503 SELF-CLINCHING THREADEDNUTFamily Self-clinching threadednutsType of product Self-clinchingnutReceiving material Light Alloy, Stainless Steel, Steel Product ...
Specialinsert s.r.l.
Height: 9 mm - 22 mm
Slide quick-action clampingnutdirectly over screw thread up to clamping point and then lock it. If the quick-action clampingnutbase is firmly in contact at the clamping point, then the head can be ...
Nominal diameter: 3 mm - 20 mm
Height: 8.8 mm - 31.2 mm
Width: 18.5 mm - 66.5 mm
WINGNUTSDIN 315 | CAST VERSION PACKAGING:Standard or according to customer specification MATERIAL:Malleable cast iron EN-GJMB-350-10 as per DIN EN 1562 bright, galvanised as per DIN EN ISO 4042, brass (MS) 2.0401 ...
BTS Befestigungselemente-Technik GmbH
Nominal diameter: 6, 5 mm
Height: 40 mm
... Surface finish as requested Hex wingnutsM6 / Spanner width 11mm M6, M8 or M10 / Spanner width 13mm Thread cast in one piece from wing to hexagon Cast from one piece Surface finish as requested Waler wingnutsCast ...
BTS Befestigungselemente-Technik GmbH
Nominal diameter: 3 mm - 20 mm
Height: 8.8 mm - 31.2 mm
Width: 18.5 mm - 66.5 mm
American form | cold-formed Metric thread from M3 to M20 available while stocks last On request: inch thread, specialist parts on the basis of the American form, e.g. with eye Packaging: Standard or according to customer ...
BTS Befestigungselemente-Technik GmbH
Nominal diameter: 8, 10, 5, 6 mm
Nutsmade of molybdenum and the molybdenum alloy TZM are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop
... headed cylindrical “AMSERT”embeddednutsCYLINDRICAL FLAT HEADED EMBEDDED OPENNUTCYLINDRICAL FLAT HEADED EMBEDDED CAPNUTSERRATED CYLINDRICAL FLAT HEADED EMBEDDED OPENNUT...
AMECA
... AMSERT” thin countersunk head embeddednutsTHIN CYLINDRICAL COUNTERSUNK HEAD EMBEDDED OPENNUTTHIN CYLINDRICAL COUNTERSUNK HEAD EMBEDDED CAPNUTSERRATED THIN CYLINDRICAL COUNTERSUNK ...
AMECA
CYLINDRICAL COUNTERSUNK HEAD EMBEDDED OPENNUTCYLINDRICAL COUNTERSUNK HEAD EMBEDDED CAPNUTSERRATED CYLINDRICAL COUNTERSUNK HEAD EMBEDDED OPENNUTSERRATED CYLINDRICAL COUNTERSUNK ...
AMECA
Your suggestions for improvement:
坚果的基于“增大化现实”技术e used with bolts to assemble parts or provide motion transfer. They are tapped to be mated with a screw, a bolt or any shaft with external threads.
ApplicationsNuts have two main applications:
- Parts assembly: Assembly nuts take many different many forms.
- Motion transfer: Turning the bolt moves the nut left or right. The nut-bolt system can transfer great force. It is found in vices, bar clamps, screw jacks, car jacks and similar devices. The system converts a rotational movement into a translation movement. Rarely reversible, the opposite conversion is nonetheless possible if the bolt's threads are long enough.
The most common standard nuts include hexagonal nuts, minimum-height, or locknuts (any nut can serve the same purpose, depending on its position), cap nuts, self-locking nuts, square nuts, flanged nuts, wing nuts, castle nuts, et al. Most nuts are screwed on, though weld nuts and clinch nuts also exist.
Receive updates on this section every two weeks.
请参考啊urPrivacy Policyfor details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining