Monitoring relays

Tripping current: 500, 200 mA
Trigger voltage: 24 V

Self-monitoring, short-circuit proof inputs and outputs E-STOP with cross-faultmonitoringand optional simultaneitymonitoringConnection of mechanical safety switches and ...

Tripping current: 208 mA
Trigger voltage: 24 V

For the connection of safety light curtains / safety light grids with OSSD Safetyrelaywith integrated muting function Safety category type 4 to IEC 61496 Integrated signal and feedback contacts

Tripping current: 200 mA
Trigger voltage: 24 V

…pulse comparison of two sensors Redundant structure of the hardware Redundant evaluation of the pulse sequencesRelaywith positively-driven contacts Four switch points selectable

Tripping current: 8 A

…Depending on the type of application you want to complete, you can connect one or two transducer units to this device and safelymonitorthem.

Tripping current: 5 A

…mounting rail enclosure which is compact in size. The SCRrelayscan impress numerous applications to performance level in line with EN 13849 standards. In compliance with this, the SCRrelaysmonitor…

Trigger voltage: 24 V

The Safety Control Module SBR031LC has three safety contacts, and one signal output. This product is great for processing potential-free outputs, emergency stop command devices, position switches or solenoid interlocks.

Trigger voltage: 24 V

最好的关于to signal assessment involving results of security magnetic fuses Drop-out hold off could be established around 0,4 until 1,5 s 3 security connections, STOP 1 1 Signalling yield Well suited for signal handling ...

Trigger voltage: 24 V

…is a two-function safetymonitoringunit that uses a double evaluation setup and two enabling paths with their own shut-down setups. It uses an emergency exit opening to get both paths up. It also has a guard door ...

Tripping current: 10, 6, 30 A
Trigger voltage: 220 V - 415 V

Electronic voltagemonitoringrelaysfor single and three-phase applications •Multifunctional types, providing the flexibility ofmonitoringUndervoltage, Overvoltage, Window Mode, Phase ...

…a fast linear trip is required. All of the overloadrelaysprovide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, powermonitoring, and ...

…combines the features of a ground-fault protectionrelayand insulationmonitorinto one unit. It protects against ground faults bymonitoringinsulation resistance when the motor is ...

Trigger voltage: 65 V - 265 V

…neutral-grounding resistormonitoringrelaythat is compliant with Rule 10-302 of the 2018 Canadian Electrical Code Part I (CE Code). It measures neutral current, neutral-to-ground voltage, and neutral-to-ground ...

Tripping current: 150, 220 mA

The world class quality MSI-MC310 SafetyRelayis used as an evaluation unit for magnetically coded safety system that can be used in the food, pharmaceutical and wood industry tomonitormoveable guards ...

Trigger voltage: 30 V

Can be used universally for sensors withrelaycontacts and with OSSD outputs Evaluation unit with adjustable time delay for emergency stop, safety switches withrelaycontacts and with OSSD outputs, ...

Tripping current: 2.3 mA

Perfect start With a width of just 45 mm, even the MSI 410, 420 and 430 basic modules offer 24 safe inputs and outputs. USB and Ethernet interfaces ensure simple connection during configuration and diagnosis. In the MSI 430 model, even ...

…module models have a variety of safety inputs, solid-state safety outputs and safetyrelayoutputs • Innovative live display feature and diagnostics allow for activemonitoringof I/O on a PC and assist ...

Trigger voltage: 24 V

…applications, such as photoelectricmonitoringposition or end-of-travelThe safety inputs can monitor:+24V dc solid-state (PNP) outputs in single-channel or dual-channel hookup+24V dc source that is switched by hard/relay…

Trigger voltage: 12 V - 230 V

Modulesmonitorup to 10 external devices for contact failure or wiring faults Module goes into lockout mode if it detects a fault Available voltages include 24V dc 24V ac/dc 115V ac or 12 to 24V dc or 230V ...

…This new module is revolutionary as it is only 17.5 mm wide and 70 mm deep. DOLD offers specific emergency stop buttonmonitoras well as bus outputs for in big installations with various emergency stop buttons it ...

…According to EN 50156-1 for furnaces • 2-channel operation • Forcibly guided output contacts • With or without cross faultmonitoringin the E-stop loop, switch S1 • Manual restart or automatic restart, switch S2 • ...

Tripping current: 8 A
Trigger voltage: 24 V

The multifunctional safety module UG 6970 from the SAFEMASTER C family serves the protection of staff and machinery by releasing and interrupting safety circuits. Up to two independent safety functions which are selected in a simple way ...

Trigger voltage: 110, 230, 24 V

Insulationmonitoringin the electrical system. System insulationmonitoringand safetyrelayssuitable for permanentmonitoringof IT electrical lines. Insulationmonitoring…

The CD1000 can be used with an NGRmonitorin HRG systems with a system voltage ULL up to 690 V (UNGR ≤ 400 V). The maximum operating altitude is 2000 m above mean sea level. • Coupling device for NGRM • Range ...

• Undervoltage, overvoltage and frequencymonitoringof AC/DC systems 0…300 V • Variousmonitoringfunctions selectable U, f • Adjustable start-up delay, response delay and delay on release • Password ...

…Undervoltage, overvoltage and frequencymonitoringof AC/DC systems 9.6…150 V (VME421H-D-1), 70…300 V (VME421H-D-2) • Integrated energy storage, is supplied by the system being monitored • Variousmonitoring…

Trigger voltage: 24, 230 V

This is a voltagemonitoringrelaymodule that is capable of measuring 1-phase networks. Our E1UM230V01 lets you select a suitable voltage range of 24V AC, 24V DC or 230V AC in one device. The settings ...

Trigger voltage: 690 V

…Series Phase LossMonitorfor up to 690V nominal voltage This productmonitorsphase loss, phase sequence, and phase rotation. The under-voltage settings can be adjusted locally from 180V to 690V. ...

Tripping current: 10 A

…is an AC currentmonitoringin 1-phase which is equipped with thresholds and hysteresis. The multifunction device also has tripping delay that helps inmonitoringrelays. It has various ...

Tripping current: 1 mA - 6,000 mA
Trigger voltage: 0 V - 24 V

…can be signaled by means ofmonitoringoutputs. If the actuator on one of the safety switches in the switch chain is moved out of the actuating range, the AR evaluation unit opens its contacts and the corresponding ...

Tripping current: 100 mA

Evaluation unit CES-AZ-AES-01B (for 1 read head) • 1 read head can be connected • 2 safety outputs (relaycontacts with 2 internally connected NO contacts per output) • Start button and feedback loop can be connected • ...

Tripping current: 20 mA
Trigger voltage: 24 V

…tampering is provided. • Short circuitmonitoringto detect short circuits between the connecting cables and to shut down the outputs or preventrelaystarting if necessary • Earth fault/ground fault ...

Trigger voltage: 110, 230, 400 V

…of the speed of the generator with built-in pulse output Protection with password. CIRCUTOR has two types of synchronismrelays: SYNCHRO MAX and SYNCHRO MAX PID. Synchro Max Synchro Max is capable of adapting ...

Tripping current: 0.03 A - 5 A

Electronic industrial earth leakage protectionrelay, compatible with the WGC series protection transformers. Type A ultraimmunisedrelaywith high frequency current filtering and high immunity. True ...

Electronic earth leakage current intensitymonitoringrelay(IEC 62020), compatible with the WGC-TB series protection transformers. The RGU-10B is the most complete system of the range thatmonitors…

…incremental encoders, signal splitter, wiremonitoringDS260: Input for one certified incremental encoder, signal splitter, wiremonitoringThe DS series is suitable for safety-related ...

SpeedMonitorsfor incremental encoders and sensors DZ260: 3 outputrelaysand 1 analog output DZ261: 3 transistor outputs and 1 analog output DZ266: 1 analog output DZ267: 3 outputrelaysDZ269: ...

Trigger voltage: 24 V

Controllersmonitorthe safety field of several through-beam sensors. Interruption of the light beams results in the safety output being switched off. The individual light barrier controllers offer various operating modes, ...

Trigger voltage: 22 V - 29 V

…combination with the safety light curtains SG-I and safety light arrays SB-I, therelayunit allows for the interruption of safety-relevant circuits. Floating safetyrelaysare utilized.

Trigger voltage: 110 V - 240 V

TE-RTD12 Motor RTDMonitor/RelayDevice The TE-RTD12Relaydevice adds advanced RTD (Resistor Temperature Detector) and differential currentmonitoringcapability ...

Trigger voltage: 24 V

MZERO - A compact and configurable safety controller MZERO is a configurable safety hub able to manage all safety functions of a machinery or a plant. Configurable, allows cost reductions and minimal wiring. MZERO can manage ...

Tripping current: 100 A
Trigger voltage: 24 V

…safety outputs, and the machine control circuits. * Guided-contact safetyrelays* Start/Restart interlock * EDM Feedback input for extra external contactorsmonitoring

Tripping current: 6 A

…stop buttons and safety switches Safetyrelayfor emergency stop buttons and safety switchesmonitoring. Guided-contact safetyrelays2 N.A. + 1 N.C. EDM Feedback input for external ...

Trigger voltage: 24 V

…8/4 safe shutdown channels, 1 safe 1-channel potential-freerelaycontact. Contact multiplication or contact amplification by external contactors in connection with integratedmonitoringpossible ...

Trigger voltage: 24 V

…8/4 safe shutdown channels, 1 safe 1-channel potential-freerelaycontact. Contact multiplication or contact amplification by external contactors in connection with integratedmonitoringpossible ...

The U1, the U1D, and the U1M, which are manufactured by Fanox, are single phase voltagerelaysthat are DIN mounted. The U1 features two potentiometers, and the minimum and maximum thresholds can be modified. The U1D ...

Trigger voltage: 2 V - 10 V

…range programmable ●Max. 4 alarm outputs ●Isolated analog output 0/4..20 mA, 0/2..10 V DC Characteristics TheMonitoringRelayMR50 has inputs for industry standard signals 0/4..20 mA and ...

Trigger voltage: 2 V - 10 V

…range programmable ●Max. 2 alarm outputs ●Isolated analog output 0/4..20 mA, 0/2..10 V DC Characteristics TheMonitoringRelayMR50Ex输入了行业标准团体nals 0/4..20 mA and ...

…;联系函数最小/最大选择●Hysteresis and time delay adjustable Characteristics CVG500monitoringrelays可用于monitoringcurrent or voltage levels. The standard ...

Tripping current: 8 A
Trigger voltage: 250 V

Sensor controller on Acotom process / mechanical switches / emergency stops Output contacts 8A/250V Anti-gluing control of the reset button Ultra-fast "DLC" short-circuit check : Short-circuit detection in 2 µs, self-resetting Safety ...

Tripping current: 8 A
Trigger voltage: 250 V

Sensor controller on Acotom process / mechanical switches / emergency stops Safety management in 2 zones in a compact 45 mm format Short-circuit detection in 2 µs, self-resetting Removable terminals Performance level with ...

Tripping current: 8 A
Trigger voltage: 250 V

Sensor controller on Acotom process / mechanical switches / emergency stops Safety management on 9 outputs in a compact 45mm housing Short-circuit detection in 2 µs, self-resetting Removable terminals Performance level ...

Trigger voltage: 20 V - 240 V

…function Local Reset function Local Remote Outputrelays2 changeovers (TRIP+SAFE, ALARM) 5 A (240 VAC) 0,3 A (110 VDC) 2 A (48 VDC) Display indications LED green(power ON) LED red TRIP (Relay…

Trigger voltage: 24, 42, 115, 230 V

The Klaschka Pulse Rate MeasuringRelayscan be applied as a standstillmonitorof turning equipment, in a wide range of applications that involve machines and plants, vehicles and ships, mining industry, ...

Trigger voltage: 24, 42, 115, 230 V

FSN Frequency and pulse rate measuringrelayscomplete the ISN pulse rate measuringrelaywith high frequencies. Three threshold ranges from 100 Hz to| 120 kHz can be selected.

Tripping current: 1 mA - 15,000 mA

The undervoltage and overvoltage protectionrelay, manufactured by Klaschka, is a robust versionrelaythat is incorporated with a self-supervision system and restriction settings. This is built to control ...

Chordn’s three-phasemonitoringrelaysHMPB7 series are mainly used tomonitorthe phase sequence, phase loss and over-undervoltage of power supply system. The width of thesemonitoring…

…The 17.5mm pitch of our Chordn’s three-phasemonitoringrelaysHMPA5C series are appropriate formonitoringthe phase sequence-loss and undervoltage. Standard 35mm DIN rail mounting is ...

The 17.5mm pitch of our Chordn’s three-phasemonitoringrelaysHMPA5A series are mainly designed formonitoringthe phase sequence and phase loss. Standard 35mm DIN rail mounting is ...