Fuel pumps

Flow: 0 l/min - 50 l/min
Head: 0 m - 19 m
Power: 500 W

ThePump集是年代uitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, machine oil and ...

Flow: 0 l/min - 60 l/min
Pressure: 6 bar
Head: 0 m - 36 m

ThePump集是年代uitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. • Media examples: Diesel, heating oil, hydraulic oil, machine oil and ...

Flow: 0 l/min - 40 l/min
Pressure: 6 bar
Power: 500 W

。.. joint of thepump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of thepump。The max. ...

Flow: 80 l/min
Head: 12 m
Power: 500, 800 W

Pre-assembledpumpkit topumppetroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drumpumpF 430, outer tube material aluminium, ...

Flow: 240 l/min
Head: 13 m

The horizontally installed,compactcontainerpumpMINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a verticalpump, the MINIFLUX can ...

Flow: 120 l/min
Head: 26 m

With the DrumpumpF/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. Thepumphas an integrated backflow valve that is easy to close before taking thepump。..

Flow: 0 l/min - 467 l/min
Pressure: 1 bar - 8 bar

The ARO 1½” EXP Metallic is a diaphragmpumpthat is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, and hastelloy-C ...

Flow: 110 l/min

。.. Designed specifically for dispensing petroleum-basedfuelMeet UL-79 specification code Compatible with gasoline,dieselfuel, kerosene, aviationfuel, ...

Flow: 284 l/min

。.. Designed specifically for dispensing petroleum-basedfuelMeet UL-79 specification code Compatible with gasoline,dieselfuel, kerosene, aviationfuel, ...

Flow: 20 l/min - 170,000 l/min
Pressure: 0 bar - 120 bar
Fluid temperature: 300 °C

CHEMICAL泵S[CHEM] -INDIVIDUAL TYPES & DESIGNS Gearpumpsfor the Chemical industry Gearpumpsfor chemical applications CHEM gearpumpto transport and dose ...

Flow: 20 l / h - 340000 l / h

。.. industry. The requirement topumpviscous and sticky substances out of avacuumis no easy task. However, our CHEM design easily meets this requirement. The requirements for dosing and transferpumps。..

Flow: 20 l/h - 170,000 l/h
Pressure: 0 bar - 120 bar

Meteringpumpsof the CHEM series are made of corrosion-resistant stainless steel. For the delivery of Adblue® a variety of sealing systems and a wide range of modular materials are available for this series. Due to their ...

Flow: 32 l/min
Pressure: 1.2, 0.8 bar
Weight: 5.43 kg

。.. EXGO! stands out for its intrinsic features: *smallsizes; * remote control; *continuous duty cycle; * built-in bypass valve; * ATEX certification.Compactand sturdy, EXGO! is an ATEX vane ...

Flow: 0 l/min - 50 l/min
Power: 250 W
Fluid temperature: 23 °C

。.. a transferpumpsuitable for flammablefuelssuch as gasoline, kerosene and diesel. It is easy to use, versatile, andcompactand adapts to your requirements: you can use it wherever ...

Flow: 100 l/min
Pressure: 0 bar - 2.5 bar
Power: 1,125, 1,035, 874 W

。.. for flammablefuelssuch as Gasoline, kerosene and diesel. It is simple to use, compact, versatile and adapts to any working conditions: you can use it wherever you need it most. ATEX CERTIFIED QUALITY The PIUSI ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

。.. clampedpumps。• Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a SmartPump-Controller System ...

Flow: 54 l/min
Pressure: 1.5 bar - 7 bar
Head: 5 m - 8 m

。.. o - Stainless Steel diaphragm-shaft. • - Undersizedpumpto fit in any application or reduced space. • - Lateral fluid inlet and outlet ports avoid leaking directly onto thepump。•- - - - - -Compact。..

Flow: 54 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m

。.. offer a wide range of applications and fluid compatibility. Thesepumpsare very suitable for aggressive chemicals with the presence of abrasives. PIVOT Series 1/2” AODDpumpsmake the difference ...

Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C

The HPP 200 is a verycompacthigh-pressurepumpthat is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of thepumpis designed for a continuous ...

Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar

。.. is an electric motor with a frequency converter, as well as an integrated mounting device for the gearbox and high pressurepump(HPP). The basic version of the HPCU is provided with a hose connection for the low-pressure ...

Flow: 20, 35, 70, 130 l/min
Pressure: 0 bar - 7 bar
Weight: 6.9, 2.5, 3.6 kg

。.. along with acompactbuild and feathered flap valves that cut down noise enable it to be the perfect machine for OEMs - original equipment manufacturers. Notwithstanding that, anyone using the normal AODDpumps。..

Flow: 0 m³/h - 3.5 m³/h
Pressure: 0 bar - 5 bar
Fluid temperature: 0 °C - 70 °C

。.. required, these self primingpumpscan achieve suction lifts up to 8 metres on water. Mono’s CB/SB, G, M and CP Rangepumpsprovide an economic answer to many pumping duties. Simple design and construction ...

Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C

KF series gearpumpsare external gearpumpsthat operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...

Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW

。.. decisive for the quality of the end product. The KF 0 stainless steel gearpumpis particularly suitable for these applications. The KF 0 stainless steel is an external gearpumpwith flow rates of 1 ...

Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C

。.. Type KF-F transferpumpswere developed specifically for use withfuels, especially for marinefuels。These need to be critically considered, especially regarding the lubricity. And ...

Flow: 0 m³/h - 3.5 m³/h
Head: 7.5 m
Power: 0.18 kW

Magnetic drive centrifugalpumpsIntel connections: 1" F Outlet connections:1/2" M Max. Delivery head:7,5 mts Max Viscosity:100 CPS Impeller:closed

Flow: 0 m³/h - 7 m³/h
Head: 8.5 m
Power: 0.25, 0.37 kW

Magnetic drive centrifugalpumpsIntel connections: 1" F Outlet connections:3/4” M Max. Delivery head:8,5 mts Max Viscosity:150 CPS Impeller:closed

。.. an easy fixing in drum. APPLICATION: Fire brigade handpumpATEX compliant, single-acting handpumpthat can be used for following media of hazard classes A I-III: Diesel, heating oil,fuel, ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants

Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar

。.. block construction with a flanged drive, this NEMO®pumpis particularlycompactand economical. Thepumpalso differentiates itself by means of low investment and operating costs. In ...

Flow: 0 m³/h - 300 m³/h
Pressure: 0 bar - 24 bar

NEMO® BY Progressing CavityPumpin Industrial Design The Solution to Convey and Accurately Dose a Wide Range of Media in Various Industries The BY blockpumpin industrial design can be used in , the ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 72 bar

。.. progressing cavitypumpsare used in demanding applications for continuous, pressure-stable, gentle and low-pulsation conveyance as well as dosing in proportion to speed in nearly every branch of industry worldwide. The ...

Pressure: 0 bar - 35 bar

。.. Can be used for transferring alcohol, asphalt emulsions,fuelcleaning solvents,fueloil, benzine, lacquer thinner, vegetable oils and many other non-corrosive, non-abrasive materials.Pumps。..

Flow: 0 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: 250 °C

。.. Petrochemical Duty PD are internal gearpumpsdesigned for refinery and petrochemical applications, all pressure-containing components are carbon steel. Design pressure according to ANSI 300 Lbs or Pn40. Pumping of:FuelOilGasoline Lube ...

Flow: 0 m³/h - 730 m³/h
Pressure: 12 bar
Head: 115 m

。.. Cooling waterpumpsWash-deckpumpsFuelpumpsWellpointpumpsIrrigationpumpsCirculationpumpsWithin industrial ...

Flow: 150 l/h - 4,400 l/h
Pressure: 4, 4.5 bar
Power: 0.12 kW - 1.1 kW

Mouvex® TM Series Eccentric DiscPumpsare ideally suited for intensive-duty applications such as the transfer of heatingfuelsand heavyfuels。Known for their legendary ruggedness, ...

Flow: 0 m³/h - 80 m³/h
Pressure: 8 bar

Mouvex® CC8 Series Rotary VanePumpsare vehicle-mounted solutions for loading and unloading petroleum products for trucks and transports. Thesepumpsare ATEX certified and compact, and feature an integrated ...

Flow: 0 m³/h - 42 m³/h
Pressure: 10, 5 bar
Power: 0 kW - 10 kW

。.. Series Rotary VanePumpshave been developed as vehicle-mounted solutions for loading and unloading petroleum products for trucks and transports. Thesepumpsinclude all the same cutting-edge features ...

Flow: 610 l/min
Pressure: 8 bar
Head: 5, 7.5 m

DiaphragmpumpsR. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 610 l/min
Pressure: 8 bar
Head: 5, 7.5 m

DiaphragmpumpsR. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

Flow: 170 l/min
Pressure: 8 bar
Head: 5, 7.5 m

The RAASM pneumatic diaphragmpumpsare designed with a 1:1 compression ratio and made topumpa vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed ...

Flow: 0 l/min - 52 l/min
Head: 0 m - 16 m
Power: 0.14 kW - 0.63 kW

SuctionPumps自吸的初始启动后,一个d operate according to the bypass duct principle. We recommendpumpmodels featuring bronze body elements for pumping water without ...

Flow: 0 l/min - 45 l/min
Head: 0 m - 45 m
Power: 0.25 kW - 1.06 kW

。.. coolantsfueloil- Kinematic viscosity - - ...12 mm²/s (12 cSt) - Pumping temperature - - 0...80° C - Suction height - - 2 m without foot-located valve 6 m with foot-located valve - ConstructionPump。..

Flow: 0 m³/h - 350 m³/h
Pressure: 0 psi - 725 psi
Head: 0 m - 160 m

。.. duty process in-linepumpaccording to API 610 Vertical inline overhung single stage process pumpwith bearing frame Design requirements according to API 610 OH3 Seal chamber and seal cartridges to API ...

Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: 180 °C

The new TopGear Blocpumpsrun on direct drive motor speed, offering an economical solution for pumping low viscous, non-abrasive media. Thecompactdesign allows quick and easy installation in areas ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar

。.. front panel with controls, apumphead with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry thepumpand, when ...

Flow: 0 l/h - 204 l/h
Pressure: 0 bar - 2 bar

Panel mounted tubepumpsfor OEM applicationsThe Verderflex OEM range of tubepumpsare designed for panel mounting or incorporation into 3rd party machines that need an accurate, low maintenance dosing ...

Flow: 0 l/min - 0.06 l/min
Pressure: 0 bar - 2 bar

。.. Verderflex OEM peristaltic tubepumpsare ideal for a wide range of applications. The sealless and self-priming design make thepumpvery easy to service and very reliable. A wide choice of motors on ...

Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C

。.. plants, apumpis required to work reliably and longlasting. Thanks to the extensive range of components andpumpsizes, hydrolub® can be configured to suit customers’ specific requirements and therefore, ...

Flow: 0.05 l / min - 12 l / min
Pressure: 100 bar
Fluid temperature: -30 °C - 320 °C

Corrosion-resistant chemical dosingpumpsfor the chemical processing industry - dosix™ MAAG dosing gearpumpsare corrosion resistant and electrically heatable conveying units, especially designated ...

Flow: 2.8 m³/h
Pressure: 3.5 bar
Power: 0.37 kW - 1.5 kW

。.. lubricant oils, waste oils,fueloil, diesel, etc. Characteristics More Information FLUID Water with low solids contect, Seawater, Fluid with particulates, Diesel, Oil TECHNOLOGY DC, Eccentric rotor ATEX No泵。..

Flow: 2.2 m³/h
Head: 0 m - 20 m
Power: 0.37 kW

。.. lift: 6 metres Specifications and advantages: Electric turbinepumpfor hydrocarbons Characteristics More Information FLUIDDieselTECHNOLOGY Side channel ATEX No泵。..

Flow: 3.6 m³/h
Head: 0 m - 60 m
Power: 0.75 kW

。.. metres specifications and advantages: self-priming open turbine monoblockpumpcharacteristics more information fluiddieseltechnology turbine atex nopumpbare orifice ...

Flow: 0.08 l/min - 3.5 l/min
Pressure: 0 bar - 7 bar
Head: 1 m - 2 m

MG200 Series / Magnetic DriveMicroGearPump(DC brushless motor, outside controller) 1. Using magnetic coupling drive without leakage, 316 L stainless steel shell, PEEK materials gear, PTFE sealing ...

Flow: 1 l/h - 210 l/h
Pressure: 7 bar - 10 bar
Power: 70 W

MG200 Series / Magnetic DriveMicroGearPump(DC brush motor) 1. Magnetic gearpumps, using magnetic coupling drive without leakage,316 stainless steel shell, PEEK material gear,PTFE ...

Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg

The Williams “W” Series PlungerPumpsoffer a packed plunger design The Williams “W’ Series is a piston plungerpumpwith a mechanical seal. It is capable of precisely injecting chemical into a wide ...