- Industrial machines and equipment>
- Welding and Assembly>
- Other assembly equipment
Other assembly equipment
{{#each product.specData:i}}{{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}{{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}
{{{product.idpText}}}
The Model CRD Semi-Automatic Dual Pin Inserter is based on SPIROLs standard Model CR design and is a very strong and stable dual vertical pin insertion machine. Able to install two pins simultaneously, it is ideally suited for moderate ...
SPIROL
Model CR Semi-Automatic Heavy Duty Pin Inserter This robust, vertical pin insertion machine is ideally suited for moderate to high production for applications requiring up to 8kN (1,800 lbs) of installation force. A retractable pin orientation ...
SPIROL
这个设备是容易处理的it is not heavy and mobile. The unit is a horizontal pin inserter made to affix certain models of coiled pins such as the SPIROL Series 550 into plastic hinges. It features its easy detachable cylinder/driving ...
SPIROL
Concentrated innovation for a faster, more reliable production process: these are the MCA tightening modules. Suitable for large batches of the same screws. They can be integrated into existing production systems such as assembly lines, ...
FIAM Utensili Pneumatici Spa
Tightening module for COLLABORATIVE ROBOT, with automatic screw feeder, air or electronic nutrunner motor and a device to be clamped to the robot’s wrist, entirely designed and patented by Fiam. For torque ranges up to 5.6 Nm, is able ...
FIAM Utensili Pneumatici Spa
Tightening module for COBOT with automatic screw feeder. Equipped with: - Electric tightening device with torque/angle current control. - Automatic Forward bit stroke device (patented) - Customized screw-retaining head - Screw ...
FIAM Utensili Pneumatici Spa
Nominal diameter 50 to 1000 mm / Min: 50mm Max: 1000mm HMVC: 1.967 to 37.410 inches Construction: With automatic piston return Other features: Hydraulic
INSERT 08 PSM is an pneumo-hydraulic equipment designed to achieve a perfect preassembling in hoses (up to 8'' in diameter) before crimping.
OP Srl
Insert 03/P is designed to achieve a perfect fitting preassembling in hoses (up to 3" in diameter) before crimping. MAIN FEATURES : - pneumatic feeding; - pressure adjustment vice locking; - cylinder stroke pressure adjustment; - ...
OP Srl
INSERT 02/P Insert 02/P is designed to achieve a perfect fitting preassembling on hoses (up to 2" in diameter) before crimping. MAIN FEATURES: - pneumatic pump; - cylinder stroke pressure adjustment; - manual cycle.
OP Srl
High-strength joints in metal materials Form-fitting, non-positive connections through clinching Clinching uses cold forming to produce two-layer or multilayer joints of metal sheets and/or profiles, similar to snap fasteners. By ...
Working range of 14 "- 21" Improved accessibility and maintenance through parallel ground-level feeding of tires and rims each with an automatic soaping station Type-specific adjustable assembly station for the assembly ...
Cordless Battery Blind Rivet Tool Battery Setting Tools for Blind Rivets More Information Designed for - Blind rivet Drive Style - Battery
Goebel集团
Blind rivet hand tool PRODUCT PROPERTIES Hand Setting Tools for Blind Rivets Designed for - Blind rivet Capacity - 2,4 - 4,8 mm Drive Style - Hand
Goebel集团
Blind Rivet Hand Tool PRODUCT PROPERTIES Hand Setting Tools for Blind Rivets Designed for - Blind rivet Capacity - 2,4 - 4,0 mm Drive Style - Hand
Goebel集团
Traditional floor-type wire harness assembly lines offer a sturdy and simple design for a wide range of applications. Work boards are placed on the trolleys. Driven by a frequency controlled motor and conveyor chain, the trolleys move ...
Transverse-Type wire harness assembly lines save floor space and improve safety by eliminating the wide swing area at the ends of traditional “rotary style” assembly lines. Driven by a frequency converter controlled motor, the work ...
Horizontal or lifting-type assembly lines offer a stable and efficient platform for wire harness assembly. It offers a small footprint with operator access from both sides of the line saving valuable floor space and improving productivity. The ...
It's small, it's fast, it's nimble! And that's not all. The new Birdie® from GESIPA is the smallest and lightest battery-powered blind riveting tool in its performance class. Plus it has an ergonomic design with a balanced centre of gravity ...
GESIPA® Blindniettechnik GmbH
The iBird® Pro is the latest tool in the GESIPA® Pro series with the new CAS battery.It can be networked with a smartphone, tablet or PC via an app! The app is available for Android and iOs devices. The iBird® Pro can be connected to ...
GESIPA® Blindniettechnik GmbH
Rivet diameter: 2.4 mm - 6 mm
The brushless motor and 10,000 N of force make the AccuBird® Pro extremely fast for installing blind rivets up to 5 mm in diameter, in any material and up to 6 mm in diameter aluminium. The BLDC motor of the AccuBird® Pro has an extremely ...
GESIPA® Blindniettechnik GmbH
The DFG 500/60 clinching machine is a universal machine for the clinching of sheet metal and profiles. The large throat allows for the clinching of unwieldy and large workpieces, including hollow shapes. The machine is equipped with an ...
Eckold GmbH & Co. KG
The stationary clinching unit DFG 400/50 PH is our cheapest model with which you can enter into a stationary and reliable production. A compressed air connection with a maximum inlet pressure of 16 bar is necessary and the operating pressure ...
Eckold GmbH & Co. KG
The multi-function unit is a universal C-shaped stationary machine designed for sheet metal utilising industries as a machine for every situation. In respect to working with sheet metal and profiles in aluminium, steel or stainless steel ...
Eckold GmbH & Co. KG
PROCESSES Automatic latch assembly into upper seat track Capability to assemble several models Part recognition, identification and traceability TECHNOLOGIES Rotary transfer with 4 workstations Automatic screwing with automatic ...
AGME Automated Assembly Solutions
PROCESSES Automated assembly of seat tracks Capability to assemble several track models TECHNOLOGIES Linear transfer with 15 workstations Palletized line with special fixtures Poka-Yoke of pallets to ensure correct positioning of ...
AGME Automated Assembly Solutions
Automatic assembly of sliders Palletized line with special tooling Parts presence control Upper track greasing Automatic feeding of components: ball cages, upper and low tracks Automated assembly of parts Automatic crimping and ...
AGME Automated Assembly Solutions
HYDRAULIC NUTS The hydraulic nuts are used in all those applications where it is not possible to use a mechanical nut due to the need for continuous maintenance operations, heat, vibrations or other factors. • They replace the traditional ...
液压螺母螺旋桨SHAFT-RUDDER耦合220 ton - 1500 bar hydraulic ring for keying on conical shafts. Equipped with safety ring to maintain the desired pre-load. The system comprises a series of 1500 hand pumps to ...
- Standard shuttles 48x48 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology - Intelligent conveyor ...
- Standard shuttles 80x80 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology Exemples: - Assembly line for watch movements - Manual or automatic assembly line - ...
Automatic screwing station of watch movements • Translation and rotation enable access to all positions of the movement • Small overall dimensions • Automatic screwing system
Automated assembly Machines We develop, design, manufacture and install automated assembly machines. Many processes can be introduced on these assembly machines (transitic line, robots…) for adapt to the needs of our customers. Our ...
CMF has acquired a know-how in the manufacturing of automatic assembly machines and assembly production lines. Our automatic assembly machines and assembly production lines also integrate several different technologies such as: - ...
AUTOMATIC STEEL REINFORCEMENT SCREWING MACHINE Automatic screwing of the steel reinforcement bar in the PVC profiles that comes out of PIM 6508 and PCC 6505 Profile Processing and Cutting Centers. Machine is fully compatible ...
Komax presents mci 792 sleeve insertion module. It is the first of its kind that allows conversion under a few minutes to other sleeve types. Some key features of this device are excellent insertion capabilities, ease-of-use and dependability. ...
System for pneumatic inserting The handheld inserting system HPP is driven pneumatically. Due to its compact design, the handling characteristics and the ergonomics of the device are noticeably improved. With the handheld system HPP, ...
Compact solution for demanding assembly solutions With the SMZ WEBER offers a compact system solution for complex assembly tasks. The SMZ is available in three different widths and has a flexible front loading system that allows manual ...
Specifications: Stroke rate: continuously variable up to max. 250 1/min. Press: nominal stamping capacity 300 kN, stroke 60 mm Servo units: max. nominal forming capacity 40 kN, max. stroke 120 mm Feed length: servo feed: any ...
Specifications: Stroke rate: continuously variable up to max. 250 1/min. Press: nominal stamping capacity 500 kN, stroke 15 - 63 mm, with SP 500 Servo units: max. nominal forming capacity 40 kN, max. stroke 120 mm Feed length: ...
• Capacité: 0 2". • Modèle of pneumatic bench. • CONCENTRIC PNEUMATIC ETAU. • Réglage of pressure on the movements in advance and • TIGHTENING OF THE VICE. • Equipé with tools for the union elbows (forks). • Equipé with 4 staged ...
CLAVEL
The ME 172 provides assembly of couplings on rubber hose, with metallic support. The floor-mounted unit offers tightening, with a single switch. Also, it features a built-in hydraulic unit, and a thrust control with 2 simultaneous switches. ...
CLAVEL
The ME484-A is an assembly machine developed by Clavel. It comes with fitting movement via pressure adjustment, and 2 tightening jaws sets from 12 to 55 and from 55 to 80 diameters. The bench-top model is also equipped with 6 bar air ...
CLAVEL
Universal Machine Tending Robotic Cell HSR1800-35 Flexible Workpiece Loading System Smart Workpiece Handling Workpiece Height up to 250 mm Workpiece Diameter up to 250 mm Compact Design - Small Footprint Load Capacity up to ...
HSTec Brand of the CHIRON Group
Universal robotic cell for machine tending applications
HSTec Brand of the CHIRON Group
Multistation automated assembly and control machine •high precision and process reliability •product functionality control •high productivity, short cycles •advanced software solutions, automatic reports •remote assistance
HSTec Brand of the CHIRON Group
Application: riveter 3.2-6.4mm (1/8”-1/4”) Composition: Bolts M4, M6, M8, M10 Nuts 4,5,6,7,8,10,12
NUT RIVETER M3-12 Characteristics: Maximum working stroke: 9mm
这个项目ect was a combined application of a gripper and an assembly station. Using magnetic locking and centring by cone, the gripper positions the two parts to allow the final part to be assembled in two stages using power from a ...
这个项目ect, which is a complete semi-automatic cell, includes the grippers, turntable with interchangeable placement as well as a checking station. It was installed directly on the customer's site and then tested.
Rivet diameter: 2.4 mm - 4.8 mm
Hand tool ideal to place blind rivets from d.2,4mm to d.4,8mm (d.4,8mm aluminium only). With return spring.
RIVIT
Rivet diameter: 2.4 mm - 4.8 mm
Hand tool ideal to place blind rivets from d.2,4mm to d.4,8mm (d.4,8mm aluminium only). With return spring.
RIVIT
Rivet diameter: 2.4 mm - 4.8 mm
Hand tool ideal to place blind rivets from d.2,4mm to d.4,8mm (d.4,8mm aluminium only). Without return spring.
RIVIT
Coil screw system 2G for automated and partially automated installation of wire thread inserts. Due to the slim construction, screw systems can be placed close to each other. This leads to more efficient use of existing production areas ...
HONSEL-Group
多铆接工具是真正的多面手。They are the only tools which are capable of processing all three types of blind rivets (blind rivets, blind rivet nuts and blind rivet bolts). The lever tool MULTI 5 with its folding arms ...
HONSEL-Group
多铆接工具是真正的多面手。They are the only tools which are capable of processing all three types of blind rivets (blind rivets, blind rivet nuts and blind rivet studs). The high-quality hand tool MULTI 1 has a 360° ...
HONSEL-Group
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to ourPrivacy Policyfor details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining